| Series | 0.5mm FFC/FPC Swing Cover Connector (H=1.8 mm) / 8.15A |
| Applicable Cable Thickness | 0.3mm |
| Pin Count | 4-128pin |
| Housing Material | LCP Nature Color (UL 94V-0) |
| Cover Material | LCP Black (UL 94V-0) |
| Terminal Material | Copper Alloy |
| Stator Material | Copper Alloy |
| Contact Type | Single side under the contact |
| Terminal Soldering Type | SMT |
| PCB Thickness Compatibility | T=0.30.02mm |
| Plating Specification | Contact area and solder area: Gold plating 1~3u" (See drawing) |
| Coplanarity | 0.10mm MAX |
| Operating Temperature | -40 ~ +85 (without ice or dew) |
| Operating Humidity | 20-85% RH |
| Storage Temperature | -10 ~ +50 (without ice or dew) |
| Storage Humidity | 20 ~ 85% RH |
| Rated Voltage | 50V (AC/DC) at 20 ambient temperature |
| Rated Current | 0.5A / PIN at 20 ambient temperature |
| Contact Resistance | 30m Max. |
| Insulation Resistance | 500M MIN (at 100V DC for 1 minute between adjacent terminals) |
| Dielectric Withstand Voltage | 250V AC for 1 minute between adjacent terminals (No damage/shorting) |
| Single Pin Retention Force | 0.2N MIN |
| GND Pin Retention Force | 0.3N MIN |
| FFC/FPC Retention Force | 0.3N Min/Pin (PIN Count X 0.3N Min) |
| Vibration Resistance | Amplitude: 1.52mm, Frequency: 10~55~10Hz (2 hours in each of 3 axes) |
| Durability | 20 cycles lock/dis-lock under load |
| Heat Resistance | 96H at 852 |
| Humidity Resistance | 96H at 403, 90~95% RH |
| High/Low Temperature Cycle | 5 cycles (specific temperatures not detailed in this excerpt) |
| Salt Spray (Gold Plating) | 48H at 5% salt water density, 351 |
| Solderability | Dip soldering tail into Tin oven at 2455 for 3sec (90% wetting) |
| Resistance to Soldering Heat | Preheating: 150~180 (60~120s), Peak: 2505, >230 for 305s |
| Recommended Soldering Profile | Preheating: 150~180 (60~120s), Peak: 2505, >225 for 305s |
