| Series Number | AFH26 |
| Model Number Example | AFH26-S FIA-1H |
| Pitch | 0.3 mm |
| Number of Terminals | 13~73 (Specific available: 13, 15, 17, 21, 23, 25, 27, 29, 31, 33, 35, 39, 41, 45, 51P) |
| Assembly Style | Right Angle / Low Contact SMT Type |
| Housing Height (H) | 1.0mm |
| Contact Plating | Gold flash (I=1u"AU) over Nickel (M=5u"AU) |
| Max. Operating Voltage | 30V AC |
| Max. Current Rating | 0.2A DC |
| Operating Temperature Range | -55C ~ +85C (Including terminal temperature rise) |
| Storage Temperature Range | -10C ~ +50C |
| Contact Resistance (Initial) | 40 m |
| Insulation Resistance | 50 M (at 500V DC) |
| Dielectric Strength | 250V AC (rms) for 1 minute (No Breakdown) |
| FPC Retention Force | Pos. x 0.15N Min. |
| Terminal Retention Force | Pos. x 0.08Kgf {0.8N} Min. |
| Repeated Actuator Insertion/Withdrawal (20 cycles) | Contact Resistance 60 m |
| Temperature Rise (Max. Current) | 30C |
| Vibration (10~55~10 Hz, 1.5mm Amplitude, 2 hrs) | Discontinuity 1 sec |
| Shock (490m/s, 3 times each axis) | Discontinuity 1 sec |
| Heat Resistance (85C, 96 hrs) | Contact Resistance 60 m |
| Cold Resistance (-40C, 96 hrs) | Contact Resistance 60 m |
| Humidity Resistance (60C, 90-95% RH, 96 hrs) | Insulation Resistance 20 M |
| Temperature Cycling (-55C to +85C, 5 cycles) | Contact Resistance 60 m |
| Salt Spray (35C, 48 hrs) | Contact Resistance 60 m |
| SO2 Gas (40C, 50 ppm, 24 hrs) | Contact Resistance 60 m |
| NH3 Gas (40 min exposure) | Contact Resistance 60 m |
| Solderability (2455C, 30.5 sec) | Solder Wetting 75% area, no voids/pinholes |
| Resistance to Soldering Heat (Hand Soldering) | No damage |
| Infrared Reflow Condition | Peak Temp. 250C (Max. 3 sec), Min. Temp. 230C (20-40 sec) |
| Tape & Reel Widths | 16mm (13-25 contacts), 24mm (27-51 contacts), 32mm (53-61 contacts), 44mm (67-73 contacts) |
| Pcs/Reel | 5K |
| Reels/Carton | 13 (13-25 contacts), 10 (27-51 contacts), 8 (53-61 contacts), 6 (67-73 contacts) |
| PCB Flatness Requirement | 0.1mm |
